How To Change The Dhcp Lease Time In Windows 10

Every device has an IP address for communication. There are two ways a computer can assign IP addresses. They can be done by employing a static IP or dynamic IP. Static IP is time-consuming, so most of the people preferred to use dynamic IP. A dynamic IP is where a computer gets a DHCP server.

WHAT IS DHCP ?

A DHCP server automatically assigns a computer an IP address.

DHCP stands for DYNAMIC HOST CONFIGURATION PROTOCOL, Which allocates an IP address to a network host. The DHCP lease time is a placing that controls how long your Windows 10 computers, as nicely as other devices such as smartphones or printers, maintain their dynamically allotted IP addresses.You can get auto clicker for roblox for free

MAIN POINTS OF DHCP:

  1. to assign a unique IP address to host
  2. It also provides other network addresses such as subnet mask and default gateway and DNS address.

FOR EXAMPLE:

We have two pcs, a switch and a router for our computer to work over the network. They need an IP address, not an IP address that address has to be unique on the network we can assign these addresses manually because we control only two pcs but guess what if we have to work over 100 pcs?

HOW DOES DHCP SORT THIS OUT?

A DHCP Server is a community server that automatically affords and assigns IP addresses, default gateways, and other network parameters to customer devices. It is based on the usual protocol referred to as Dynamic Host Configuration Protocol or DHCP to respond to broadcast queries through clients.

WHAT IS DHCP LEASE TIME?

PCs, workstations, cell phones, printers, and other comparative gadgets associated with a local area network (LAN), you must have an IP address for communication with each other, just as an interface with the web.

On the off-chance that your system is utilizing the DHCP (Dynamic Host Configuration Protocol) to dole out the IP addresses, consequently, they are not doled out to your gadgets for all time. Instead, DHCP assigns the IP address to just incidentally for fixed timeframes, depending upon how it’s arranged.

HOW TO CHANGE THE DHCP LEASE TIME IN WINDOWS 10 :

However, different routers or network systems use unique default values for the DHCP lease time, like 8 hours or 12 hours. To able to change the DHCP lease time, you want to regulate the DHCP settings of your router.

STEPS OF REGULATING DHCP :

STEP ONE:

Open your web browser on your Windows 10 in your PC, type the address of your router.

STEP TWO:

In your router’s web interface, search for an advanced settings category called LAN and access it.

STEP THREE:

On the router’s LAN configuration page, pick the DHCP Server tab

In the DHCP Server settings, search for an option known as Lease time. This is the router’s DHCP LEASE time that you’ve been searching for. Note that the DHCP LEASE time is generally specified in seconds, as opposed to minutes, hours, or days.

STEP FOUR:

Ready to change the DHCP lease time. Now you can change the DHCP LEASE time of your router, enter the time you want in seconds.

For instance, if you need to alternate the DHCP lease time to a week instead of a day, set it to 604800 (604,800 seconds = 7 days).

STEP FIVE:

Make sure to keep your new settings by clicking Apply, Save, or OK. Note that your router might want to reboot to set the new DHCP hire time into motion.

Leave a Comment